rugged, harsh environment 2.66? x 5.25? x 11.50? applied power conversion division of technology dynamics inc. available options design excellence since 1976! specifications tcp series 400-1000 watt single output switching power supplies input specifications: environmental specifications input: 90-132/180-26v vac switch select input frequency: 47-63hz inrush current: 60a max at 230vac(cold start) input current: 12a max @ 115vac 6a max @ 230vac efficiency: 85 typical (depending on output model) hold-up time: 16ms at full load (minimum) leakage current: <3.5ma maximum @ 240 vac operating temperature: 0c to +50c. derate to 50% at +70c storage temperature: -40c to +85c max 95% relative humidity cooling: internal ball bearing dc fan humidity: 20-90% rh non condensing vibration: 10-500hz, 2g 10min/1cycle for 60 min (3 axes )(standard unit) shock: 20g peak acceleration (standard unit) weight: approx: 6.6 lbs size: 2.66? x 5.25? x 11.50? the tcp series 400-1000w ac-dc power supplies provides highly regulated output power from 400-1000 watts.rugged construction and superior quality make this power supply ideal for harsh environment applications. available in standard, modified or fully custom configurations, for industrial, commercial, cots, ruggedized and military applications. output specifications adjustment range: 10% (minimum) minimum load: none regulation: line 0.5% load 0.5% typical ripple/noise: 150mv peak to peak maximum (20 mhz) set point accuracy: 1%(except 5v=2%) (maximum) output voltage adj: 10% minimum overcurrent protection: 105-125% automatic recovery constant current overlvoltage protection: 115-140% of v1 nominal overtemperature protection: heatsink temp. 90 c 5 c auto recovery standard features applications ? full range input ? low noise and ripple ? built in dc fan for cooling ? current share function ? dc good signal ? remote on/off & remote sense functions ? rugged construction ? 3 phase input ? parallel operation ? oring diode for redundant operation ? rack / panel mount ? ruggedized for shock & vibration (mil-std-810) safety and emissions ? designed to meet ul/cul60950-1 ? designed to meet tuv en60950-1 ? designed to meet en55022 (class a) ? auto line selection ? 400hz operation ? conformal coating h a 6 ? g power supplies i np u t s pe c ifi c a tions: a a a rsh environment x 5 . 2 5 ? x 1 1 . 5 0 ? sp ec if ic a ti on s a a ? ? ? lvbd (battery back-up)
mechanical outline model selection option designations low voltage battery disconnect the lvbd module adds a new dimension to battery backup power supplies. the power supply simultaneously charges the battery and powers the load. if the ac power fails, the battery continues to support the load. however, when the battery voltage drops below a predetermined level, the lvbd module disconnects the battery from the load, thereby protecting the battery from the damaging effects of complete discharge. parallel operation -par panel mount -pnl 400 hz opperation -400hz auto line select 3 phase input redundant operation (oring diode) battery back-up ruggedized/militarized conformal coating -als -3p -ord -rk -mil -cc rack mount -lvbd 400 watts 600 watts model nominal voltage (vdc) maximum current (adc) model maximum current (adc) tcp - 5 - 80 3.5/5v 80a tcp - 12 - 50 100a tcp - 12 - 34 tcp - 15 - 27 tcp - 24 - 17 tcp - 28 - 14 12v 15v 24v 28v 34a 27a 17a 14a tcp - 15 - 40 tcp - 24 - 25 tcp - 28 -21 50a 40a 25a 21a tcp - 36 - 11 36v 11a tcp - 5 - 100 16a 800 watts model tcp - 15 - 53 tcp - 24 - 33 tcp - 28 - 28 tcp - 36 - 22 tcp - 48 - 16 tcp - 12 - 66 nominal voltage (vdc) maximum current (adc) 12v 66a 15v 24v 28v 36v 53a 33a 28a 22a 48v 16a model tcp - 24 - 41 tcp - 28 - 35 consult factory maximum current (adc) 41a 35a 1000 watts tcp - 48 - 8 tcp - 36 - 27 tcp - 48 - 16 27a 20a 48v 8a tcp - 36 -16 tcp - 48 - 12 12a n/a n/a n/a technology dynamics inc. 100 school street, bergenfield, nj 07621 phone: (201) 385-0500, fax: (201) 385-0702 specifica tions are subject t o change without notice www.technologydynamicsinc.com rev.a
|
